WorldViz PPT-E, Руководство по эксплуатации, Страница: 107 / 163

Configuration
101
Link Status: GOOD/BAD/NONE, 3 different link status. GOOD means the connection
is stable enough to provide the optimal data transmission speed. BAD means the
connection is not stable and data might be lost during operation. NONE means no
data is transmitted between base station and wand. This happens when PPT wand is
out of receiver’s detection range or turned off during the operation (or out of
battery).
Buttons:
5 binary digits represent 5 different buttons individually. Each digit will
show 1 when the corresponding button is pressed, otherwise, it shows as 0 (zero).
Joystick(L/R):
The normal value is around 127. The value ranges from 0 to 255
when the joystick is moved from left to right.
Joystick(Up/Down):
The normal value is around 127. The value ranges from 0 to
255 when the joystick is moved from bottom to top.
Reset/Calibrate wand’s virtual North
1. Since the wand uses a magnetic sensor in the standard 1 light mode, you need
to reset the straight ahead or North direction.
2. Click on Post-Process / PPT Wand