WorldViz PPT-E, Руководство по эксплуатации, Страница: 19 / 163

Hardware Installation
13
These cables have BNC plugs and power plugs
on both ends. Locate these cables
Note: One side of the power/video cable has a
male termination, and the other side has a
female termination. Be sure to run your
power/video cables so that the power
termination matches the power connector on
the camera.
Identify the power connector at the back of
the camera and connect it with the power plug
of the power/video cable.
NOTE: DO NOT PLUG THE POWER SUPPLY
INTO THE POWER OUTLET OR TURN IT
ON UNTIL STEP 7
STEP 3:
After connecting the power connector, plug
the BNC end of the power/video cable to the
video out BNC connector of the camera.
STEP 4:
Repeat steps 2 through 3 for each of your
cameras.
STEP 5:
Locate the power supply (12V).
NOTE: THE POWER ADAPTER
SHOULD NOT BE PLUGGED INTO
THE POWER OUTLET UNTIL YOU
HAVE COMPLETED STEP 6.