WorldViz PPT-E, Руководство по эксплуатации, Страница: 101 / 163

Configuration
95
is both rugged and elegant in design. The internal rechargeable battery is powerful
enough to provide a full working day of tracking performance.
On the bottom of the wand are the charging jack and the mode switch. The wand
can be charged with the included charger which indicates the charging mode (red)
and the fully charged mode (green). The operating time for a wand is ca. 8 hrs and
its charging time is ca. 2 hrs.
Default marker ID values
By default, your wand has been assigned marker ID values that correspond to a
right-hand by the Vizard VR Toolkit (preset ID 3 for left LED & ID 8 for right LED).
This impacts default behavior only and you can change the ID settings for any
purpose. If you plan to use two wands in the same PPT tracking arena and ordered
them together, you’ll find that one wand is labeled “R” and then other “L” (preset left
hand IDs are 2 for left LED & 7 for right LED).
Switch positions
 Center: OFF
 Down: (standard operation) Single left wing tracked IR LED activated, either
left or center left (depending on H or X system) green indicator LED turns on.
 Up: (for calibration of magnetic distortions) Both wing tracked IR LEDs
activated, two green indicator LEDs left and right turn on, indicating X mode
or H mode.
In addition to the indicator LEDs, the IR LEDs are illuminated by a dim blue light for
better identification.
Function of the green indicator LEDs:
 Left: H system ID activated for left IR LED (tracked wing LED)
 Center Left: X system ID activated for left IR LED (tracked wing LED)
 Center Right: X system activated for right IR LED (tracked wing LED)
 Right: H system ID activated for right IR LED (tracked wing LED)
The individual programming for the indicator LEDs and IR tracking LEDs are done by
WorldViz. The LEDs are factory preset to a specific ID; contact WorldViz support for
reprogramming information or more advanced use cases.