Woodway ST PPS 43 Med, Руководство пользователя

Страница: 45 / 122

39 | UM-PP-EN-03
After pressing the emergency stop button, it initially remains locked and the treadmill cannot be used
for 10 to 15 seconds. For further use of the treadmill the button or mushroom must be released again.
For this, pull the red mushroom sharply upwards until the release can be heard and felt.
5.6.2 Emergency Stop Pull-Cord
The emergency stop switch is a magnetic contact switch, which is attached in the running direction
on the display (WUS or DaMo) or on the railing (Ortho). The circuit is closed through a magnet. As
soon as the magnet tears off the contact-free surface, an interruption of the 230 VAC supply will
initiate an emergency stop.
The magnet is secured to the runner's clothing by a clip on a lanyard/pull-cord. It should be fixed to
a tight piece of clothing (e.g. waistband).
The safety magnet can also be used to immobilize the treadmill and prevent a third party from using
the device. To prevent the use of the treadmill, for example when not supervised, the safety magnet
with pull-cord can be stored in a safe place and the treadmill cannot be put into operation.
WARNING
Danger of Injury due to Improperly Installed Pull-Cord!
If the pull-cord is not installed properly before a workout, the emergency
stop magnetic switch will not be triggered and there is a risk of injury in
the event of a dangerous situation.
►
The use of the pull-cord is mandatory.
►
Securely attach clip to tight clothing before starting the workout.
►
Adjust the length of the pull-cord with rope stopper to the shortest
possible setting, while ensuring that movement is still unrestricted.