
Installation Procedure
Wiring Installation for Standard Sawmills
Installation Procedure
AS00doc032519
1-27
1
4.
Connect the end of the orange wire removed from TRM1 or TRM5 to the provided purple
(or red) wire labeled MOTOR. Use the provided #10-24 x 3/8” screw, flat washer and
self-locking nut to secure together.
Connect the end of the black wire removed from TRM4 to the provided yellow (or black)
wire labeled MOTOR. Use the provided #10-24 x 3/8” screw, flat washer and self-locking
nut to secure together.
Slide one end of the provided 6” piece of rubber tubing over each connection. Bend the
rubber tubing over to prevent connections from contacting each other and use a 6” wire
tie to secure the rubber tubing in place. Use a diagonal wire cutter
to remove the excess
ends of the wire tie.
See Figure 1-24.
FIG. 1-24
Rubber
Tubing
Screw
Self-Locking
Nut
Flat Washer
3H0344C