Page 87
Dante
TM
Device Setup
The iAM2-8’s default
Dante Device Name
is “Wohler- …” followed by the last 6
digits of the Dante port MAC address, as shown in Figure B-3. This name can be
changed by the Dante Controller to appear that way on the network, but that will
not change the iAM2-8 unit name appearing on GUI pages and iAM2-8
Remote
Metering
or
Discovery
pages.
Figure B–3: iAM2-8 Name
During initial setup, you may want to manually change the iAM unit
Name
in the
System Setup
page to match the reassigned
Dante Device Name
for consistency.
Refer to Figure B-4.
Figure B–4: Rename iAM
Change the iAM
AoIP Name
Other changes such as
Latency
settings can be made by the Dante Controller
