Wohler iAM2-8, Руководство пользователя

Страница: 47 / 116

Page 47
Network Setup
Make network
IP Address
changes for the local iAM2-8
Management (MGMT)
Port here.
Figure 4–2: Set IP Addresses
iAM-AUDIO2-8
The procedure for changing the IP Address information is as follows:
1. Use DHCP?
Check this box if your network has a DHCP server and you want
to use dynamic addressing. Otherwise, you must enter static IP address
entries in the four fields which follow.
2.
IP Address
: Enter the network address. Leading zeroes are not required.
3.
IP Mask
: This should usually be 255.255.255.0 unless your network can
work across multiple subnets.
4.
Gateway Address
: This should usually be the same domain and subnet
address numbers as the IP Address, but with the last octet being .1.
5.
DNS-nameserver
: A default value is shown for reference only. DNS is not
normally required for basic static IP network configurations to work. Your IT
administrator will specify a value to work with mixed static/dynamic network
setups.
6. Apply : When you have made all of the necessary entries, press Apply to
apply the changes.
7.
Reset
: If you should start to make changes and then change your mind
about making them, press
Reset
to return the settings back to where they
were.