Page 6
CHAPTER 1: Installation
Introduction
Overview
The iAM2-8 is a 2RU multi-channel multi-source audio monitor with basic 3G-SDI
and analog inputs. It may also be purchased with a large variety of other inputs or
these may be added later at the need arises. Refer to the Specifications section of
this manual or contact Wohler Sales for more information.
The iAM2-8 is compact and simple to operate, with straightforward controls. It has
two touch screen LCD displays providing up to 8 high resolution level meters and
Loudness meters. Any channels (or channel pairs) from any audio/video source
stream may be monitored.
The iAM2-8 includes two 3G SDI inputs and it can monitor audio from them.
Optional modules will allow decoding of an additional SDI input, Dolby, MADI,
AES3, Dolby D, DD+, E, SMPTE 2110, SMPTE 2022-6, and AES streams. It contains
APIs for remote management.
Setups are created and configured using local menus and a web browser over a
network connection to the integral web server of the iAM2-8. The web server will
also allow you to view the audio meters remotely.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
7.
Protect the power cord from being walked on or pinched, particularly at plug
connection on the equipment and at the socket.
8.
Use only the attachments/accessories specified by the manufacturer.
9.
Unplug the equipment during lightning storms or when unused for long periods
of time.
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
