![WM Systems M2M Easy2s Скачать руководство пользователя страница 88](http://html1.mh-extra.com/html/wm-systems/m2m-easy2s/m2m-easy2s_installation-manual_990823088.webp)
88
PW=ABCD, ARMSMS=1,SYS1=0,BACKUP=0,OUTMODE=2,DOALLDIAL=0,I1BYPASS=0,
I2BYPASS=0,I1ON=DOOR.OPENING,I1OFF=DOOR.CLOSING,I2ON=MOTION.ON,I2OFF
=MOTION.OFF
PW=ABCD,ARMSMS=1,ARMON=ARMED,ARMOFF=DISAMRED,ARMFAIL=
ARMING.ERROR,ARMBLOCK=1,RESET
5. Output for control, gate opening
The relay output(s) can be controlled remotely (gate opening can be initiated on output nr. 1,
further devices can be connected / controlled remotely on output nr.2, nr.3 and nr.4 (in case
of presence of the IO-expansion).
In this mode you use the mobile network for remote control, the GSM network for SMS
messages and calls.
PW=ABCD,GPRSEN=1,IDELAY=25,I1ARM=1,TEL1=+442031234567,OUTMODE=1,GATE
SMS=1,GATEON=GATE.ON,GATEOFF=GATE.OFF,RESET
7.5 Examples of output control with SMS messages
According to the SMS format, max. You can use 158 characters in a control message.
If the parameters to be set do not fit in a single SMS message, start a new one, with the usual
PW=
password entry in the first place of each message, and then continue with the additional
parameters.
Each message can be sent one after the other, and the device will process it in chronological
order.
Parameterization is performed with the parameter names and values described in Chapter 5
and Chapter 6.
The following are examples of SMS command messages that correspond to
each mode of
output control.
1. Output Control - Alarm Arming
To do this, it must be set in advance: In the
Access List
, the phone number from which
Easy2s
®
can receive an output control SMS command must be added.