![WM Systems M2M Easy2s Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/wm-systems/m2m-easy2s/m2m-easy2s_installation-manual_990823033.webp)
33
Important! The device restarts with
factory configuration and no custom
settings!
Therefore, open a configuration file and send
it to the machine as described above, and
then set the desired parameters according to
Chapter 5.
4.8 Set manual arming
The alarm status of the device can also be controlled manually by the
EasyTerm
software.
One-button alarm arming and alarm control:
In stand-alone alarm mode, you can manually
switch the alarm status of the device with the
ON
/
OFF
buttons next to
ARM
!
The precondition for the stand-alone alarm mode
(without remote monitoring signal) is that the
value of the
OUTMODE
parameter must be
Alarm
.
At the
Status
you can see whether the alarm status is
ON
or
OFF
(ie whether the alarm status of the
device is armed).