68
By the
GATESMS
parameter you can
enable
that the
gate opening events will be notified to
the phone number where the remote control were initiated from. The
GATEON
defines the
message for the gate opening event, and the
GATEOFF
it the gate closing event message.
For sending the listed parameter values for the device (regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the screen. At
the end of the parameter sending, the device is restarting by using the new settings.
Handling the contact list for output control and gate opening
The output and gate control settings can be found in the
Configuration file window
(4), at
the
Access List
tab.
You can define phone call numbers
–
max. 125
–
which are allowed to remotely control the output line
–
or the connected device or gate opening system. The device will be control its output line only due
to the received command SMS text messages
–
or ringings - of the listed numbers!
This feature is very useful for hotels parking houses, companies, condominiums. The control type can
be: alarm status change (arming/disarming the alarm system), gate openin/closing (enginge control).
First of all, readout the stored numbers from the device by the
Read contacts
button. The read
