72
The communication can be encrypted by AES-security with the az
AESTYPE
and
AESKEY
fields.
For sending the listed parameter values for the device (regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the screen.
At the end of the parameter sending, the device is restarting by using the new settings.
In case of neccessary you can save the configuration to your computer by the
Save file
button.
5.7 Firmware update/refresh (via serial port, TCP port)
To download newer software to
Easy2S
and upgrade to the new version, select the
Firmware update
tab from the
Configuration Load
window (4).
Before uploading, make sure that the
SW VER
(software version) in the
Identifier
window (2) is
older than the version of the file you want to upload.
It is possible to upload the firmware via a serial port (if connected via
Serial Port
) or TCP IP (if
connected via
TCP-IP (GPRS)
). This is handled automatically by the program.
The system sends CID codes about the program update process over TCP / IP (such as: Update
started, update completed, update error).
When uploading from a serial port, use the
Browse
button to browse to the desired firmware (the file
name always contains the ID of the software version - eg EASY2_V21R08C02.bin - ie for a version 2.1
product, R08 = version 8, C02 = version C, 2nd edition ).
