wiwa PHOENIX GX Series, Руководство по эксплуатации

Страница: 52 / 72

Maintenance
WARNING
If parts of the machine are blocked (e.g. spray nozzle, material
filter for the spray gun, material hose, high pressure filter, suction
screen, etc.), it is not possible to fully relieve the pressure. During
disassembly work, residual pressures can escape and cause serious
injuries.
Protect yourself against suddenly ejecting material by covering
threaded connections with a cloth while loosening them.
Loosen threaded connections particularly cautiously and allow
the pressure to escape slowly.
Remove the blockages (see fault table in chap.7 on page).
After completion of the maintenance and repair work, check the func-
tion of all safety features and the faultless function of the machine.
6.1 Regular testing
The machine must be inspected and maintained regularly by a spe-
cialist:
prior to first commissioning,
after changes to / the servicing of parts of the installation that affect
safety,
after an interruption to operation lasting more than 6 months,
although at least every 12 months.
In the case of machines that have been put out of use, the test can
be delayed until the next time commissioning takes place.
The results of the tests must be recorded in writing and stored until
the next test. The test certificate or a copy of this must be available at
the machine’s place of use.
Have repair work carried out exclusively by WIWA Service or trained
specialist personnel (in/from authorized workshops if necessary).
When using the machine in Ex zones, the specialist personnel must
have knowledge of ATEX.
46 Original Operation Manual
✓
, Status:
2021/07/23
1alpg_BA_en_bb-0550010