wiwa PHOENIX GX Series Скачать руководство пользователя страница 37

Страница: 37 / 72

Transport, installation, and assembly

Position the machine horizontally on a floor that is level, firm and

free of vibrations. The machine may not be tilted or tipped. Make

sure that all controls and safety features are easy to reach.

Safety measures at the installation site:

Stability and sufficient free space for safe operation of the machine

must be ensured.
Fasten the machine to its installation site, in order to secure it

against unintended movement.
Keep the working area clean, especially all walking and standing

areas. Remove any spilled material and cleaning agents immedi-

ately.
In order to prevent harm to health and damage to property, ensure

sufficient venting of the workplace. It is necessary to guarantee at

least five-times air exchange.
Although there are no legal regulations for the low-mist injection

process itself, dangerous solvent vapors and material particles

must be extracted.
Always observe and follow the safety data sheets and processing

instructions of the material manufacturer.
Protect all items neighboring the object against possible damage

due to material spray.

4.3 Assembly

WARNING

If untrained personnel carry out assembly work, they endanger them-

selves and others, and risk the operational safety of the machine.

Electrical and electronic parts may only be installed by specialist

personnel with electrical training; all other parts, e. g. the spraying

hose and spray gun, may only be installed by personnel trained

for this.

Original Operation Manual

✓

, Status:

2021/07/23

1alpg_BA_en_bb-0550010

Содержание PHOENIX GX Series









































































Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды

wiwa PHOENIX GX Series, Руководство по эксплуатации

Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды