wiwa PHOENIX GX Series Скачать руководство пользователя страница 36

Страница: 36 / 72

Transport, installation, and assembly

Attention: danger of tipping! Ensure the load is evenly distributed,

in order to prevent the machine from tipping.
Do not transport any unsecured objects (e.g. material drum, tools)

with the machine.

Never stand under suspended loads or in the loading area.

There is a risk of death here!

Secure the load on the transport vehicle to prevent sliding and

falling.

If the machine has previously been in operation, please observe the

following:

Disconnect the entire energy supply to the machine – even for

short transport distances.
Empty the machine prior to transport – residual liquids may still

leak out of the machine during transport.
Remove all loose parts (e. g. tools) from the machine.

4.2 Installation site

The machine is intended for installation outside of Ex-zones by default.

Installation inside of Ex-zones is only possible with the explosion-

protected version of the machine.

The machine can be installed inside or outside spray booths. However,

in order to avoid contamination, an external installation is preferable.

The ambient temperature must be

minimum: 0°C�/�32°F
maximum: 40°C�/�104°F.

WARNING

If the machine is used outdoors during a storm, a life-endangering

situation may arise for the operating personnel due to lightning!

Never operate a machine outdoors during a storm!
The owner must ensure that the machine is equipped with suit-

able lightning protection equipment.

Original Operation Manual

✓

, Status:

2021/07/23

1alpg_BA_en_bb-0550010

Содержание PHOENIX GX Series









































































Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды

wiwa PHOENIX GX Series, Руководство по эксплуатации

Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды