wiwa PHOENIX GX Series, Руководство по эксплуатации

Страница: 38 / 72

Transport, installation, and assembly
WARNING
During assembly work, ignition sources may arise (e. g. due to
mechanical sparks, electrostatic discharge, etc.).
Carry out all assembly work outside of potentially explosive areas.
When using the machine in Ex zones, the specialist personnel must
have knowledge of ATEX.
Before the assembly work, ensure that:
all compressed air shut-off valves are closed,
all compressed air regulators are completely turned down and
all material shut-off valves are closed.
Prior to commissioning, correctly refit any parts or equipment re-
moved for transport purposes, as required for the intended use.
Carry out further assembly work and establish the connections in
accordance with the descriptions below.
4.3.1 Connecting the spraying hose and spray gun
WARNING
Parts that are not designed for the maximum permissible working
pressure of the machine may rupture and cause serious injuries.
Prior to installation, check the maximum permissible working
pressure of the spraying hose and the spray gun. It must be
greater than or equal to the maximum working pressure stated
on the type plate.
Only use conductive material hoses.
All original material hoses from WIWA are conductive and designed
for our machines.
32 Original Operation Manual
✓
, Status:
2021/07/23
1alpg_BA_en_bb-0550010