wiwa PHOENIX GX Series Скачать руководство пользователя

Страница: 9 / 72

Safety

2 Safety

This machine has been designed and manufactured taking into con-

sideration all safety aspects. It conforms to the current state of the

art and the applicable accident prevention regulations. The machine

left the factory in faultless condition and guarantees a high level of

technical safety. However, improper operation and misuse will pose a

risk to:

the life and limb of the operator or third parties,
the machine and other property of the owner,
the efficient function of the machine.

It is fundamentally prohibited to implement any method of work that

has a negative influence on the safety of the operating personnel and

the machine. All persons involved in the installation, commissioning,

operation, care, repair and maintenance of the machine must have

read and understood the operation manual beforehand – in particular

the “Safety” chapter.

Your safety depends on it!

We recommend that the machine owner have this confirmed in writing.

2.1 Explanation of symbols

Safety notes warn of potential accident risks and describe the mea-

sures required for accident prevention. In the

WIWA

operation manu-

als, safety notes are highlighted and labeled as follows:

DANGER

Signals a risk of accidents that are very likely to result in serious

injuries and even death, if the safety note is not observed!

WARNING

Signals a risk of accidents that may result in serious injuries and

even death, if the safety note is not observed!

Original Operation Manual

✓

, Status:

2021/07/23

1alpg_BA_en_bb-0550010

Содержание PHOENIX GX Series









































































Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды

wiwa PHOENIX GX Series, Руководство по эксплуатации

Результаты поиска

Содержание PHOENIX GX Series

Отзывы:

Похожие инструкции для PHOENIX GX Series

Бренды по названию

Популярные бренды