wiwa PHOENIX GX Series, Руководство по эксплуатации

Страница: 16 / 72

Safety
When using the machine in Ex zones, the specialist personnel must
have knowledge of ATEX.
Explosion-protected machines meet the requirements of the ATEX
Directive for the device group, device category and temperature class
cited on the type plate or in the declaration of conformity.
The owner is responsible for designating the zoning in accordance
with ATEX Directive, Appendix II, No. 2.1-2.3 in accordance with the
stipulations of the responsible regulatory body. The owner is required
to check and ensure that all technical data and labeling comply with
the applicable stipulations according to ATEX.
For applications, in which a failure of the machine could lead to dangers
to personnel, the owner is required to implement appropriate safety
measures.
Please note that some parts have their own type plate with separate la-
beling according to ATEX. In this case, the lowest explosion protection
of all labels displayed applies to the entire machine.
If agitators, heaters or other electrically operated accessories are
attached, the explosion protection must be checked. Plugs for heaters,
agitators, etc. that do not have explosion protection may only be
plugged in outside of areas that fall under the explosion protection
ordinance, also if the accessory itself is explosion protected.
WARNING
Heating solvents can lead to an explosion. Serious personal injuries
and property damage may result.
Observe the flashpoint and ignition temperature of solvents.
Switch all heating systems off when carrying out the following
work: Cleaning, pressure testing, decommissioning, mainte-
nance and repair.
Never immerse a hot spray gun in solvent.
10 Original Operation Manual
✓
, Status:
2021/07/23
1alpg_BA_en_bb-0550010