Will Burt 10-60 HDL, Руководство по эксплуатации

Страница: 89 / 166

PAGE 87 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
2. Secure the external support bracket around the base tube with the hardware from the
external support bracket kit. Do not overtighten the external support bracket and deform the
base tube (doing this damages the mast). The mounting hardware must include proper
means to resist vibration loosening, such as thread-locking compound or locking hardware.
Torque all hardware as appropriate for its size and grade.
For external support bracket:
• P/N: 4443601: Torque the ⅜-16 bolts to 15.83-20 ft.-lb. (21-27 Nm)
• P/N: 909984: Torque the ⅜-16 bolts to 15.83-20 ft.-lb. (21-27 Nm)
• P/N: 4894901: Torque the first five ⅜-16 bolts to 16.7 ft.-lb. (22 Nm) and final ⅜-16 bolt
to 20 in.-lb. (2.2 Nm) (Figure 5-5). Only torque the final ⅜-16 bolt after torqueing the first
five bolts.
Figure 5-5 External Support Bracket P/N: 4894901 Installation
3. If necessary, use the external support bracket as a template to drill holes in the desired
support structure. Ensure the mast system is level in all directions during drilling.
4. Ensure the mast system is level in all directions. If necessary, spacers may be added
between the external support bracket and the support structure to keep the correct alignment
between the external support bracket and the support structure.
5. Secure the external support bracket to the support structure with:
a. (6) Sets of 7/16 Hardware for External Support Bracket P/N: 4443601
b. (6) Sets of 9/16 Hardware for External Support Brackets P/N: 909984 and
P/N: 4894901
See Section 5.3 for hardware sizing. The mounting hardware must include a proper means to
resist vibration loosening such as thread-locking compound or locking hardware. Torque all
hardware as appropriate for its size and grade.
Torque this bolt to 20 in.-lb.
after torqueing the other
5 bolts to 16.7 ft.-lb.
Orthogonal View
Side View