Will Burt 10-60 HDL, Руководство по эксплуатации

Страница: 81 / 166

PAGE 79 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
3. Ensure all components are included and that the required tools are readily available. The
components in the system shipment are shown in Table 5-5. The components your system
includes will vary based upon your order.
4. Inspect for any shipping damage. Notify the carrier if damage is evident.
5. Using the center of gravity (COG) label as a reference, outfit the mast with a sling capable of
supporting the mast weight (Figure 5-3). The sling must support the mast from at least two
points. Attach the sling so that horizontal balance and control can be maintained while
positioning the mast. Hoist and slowly lift the mast until just free of the mast saddles. Lower
the mast and adjust the sling as necessary to balance the mast. Hoist the mast free from the
crate and carefully move the mast into the desired position.
Table 5-5 Possible Components in the System Ship
Telescoping Mast Hardware Bag (P/N:
5032501 or 902853)
Drain Kit (P/N:
902982)
Magnet Warning Kit
Mast Top Cover (P/
N: 5063501 or
902989)
Identification Plate
(P/N: 902851)
Label Kit (English) Control System (P/N:
5572601)
Pneumatic System
Options (Sold
Separately)
Base Plate Options:
• Non-Rotatable
Base Plates
• Rotatable Base
Plates
Payload Platforms
and Stub Adaptors
(Sold Separately)
Support Bracket
Options:
• Internal (Roof)
Mounting Kit
• External Support
Bracket
Shelf Bracket
Guy Line Options
(Sold Separately)
Additional Accessory
Options (Sold
Separately)
Hold Down Leash
Operating Manual
(this manual)