Will Burt 10-60 HDL, Руководство по эксплуатации

Страница: 34 / 166

PAGE 32 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
3.3.4 Mounting Hardware Options (Sold Separately)
Mounting hardware is used to secure the mast in place.
Possible options for the mounting hardware include:
• Base Plate Options
• Non-Rotatable Base Plate
• Rotatable Hardware Kits
• Support Bracket Options
• External Support Bracket
• Internal (Roof) Mounting Kit
• Shelf Bracket
3.3.4.1 Base Plate Options
The base plate is used to stabilize the mast and to provide a means of securing the mast to a
mounting surface.
Base plate options include:
• Non-Rotatable Base Plates
• Rotatable Hardware Kits
Non-Rotatable Base Plate
The non-rotatable base plate is used to stabilize the mast and to provide a means of securing the
mast to a mounting surface. The non-rotatable base plate (Figure 3-13) is a square plate with
countersunk holes that match threaded holes on the base tube.
Non-rotatable base plates for Heavy Duty masts typically have a hole in the center of the base
plate to allow for the option of routing air to the bottom of the base tube. Non-rotatable base
plates for Super Heavy Duty and Ultra Heavy Duty masts typically do not have the center hole.
Figure 3-13 Non-Rotatable Base Plate (P/N: 4995301 and 902044 Shown)
This Side Faces
(4) Through-Holes
(4) Countersunk Holes
Mounting Surface
Center Hole
P/N: 4995301 Shown P/N: 902044 Shown