Will Burt 10-60 HDL, Руководство по эксплуатации

Страница: 107 / 166

PAGE 105 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
5. Fasten this assembly (Figure 5-19) together using:
a. (8) ¼ Inch (M6) Bolts
b. (8) ¼ Inch Lock Washers
c. (8) ¼ Inch Nuts
The mounting hardware must include proper means to resist vibration loosening such as thread-
locking compound or locking hardware. Torque all hardware as appropriate for its size and
grade.
Figure 5-19 Fasten Assembly Together
Once the mast is installed, see Section 5.8 for information on installing the pneumatic system.
Rotatable Heavy Duty Masts
To complete installation, slide the weather bonnet, with the o-ring in the notch, down the mast
and over the roof flange. If the weather bonnet is difficult to maneuver, put soapy water on the
mast to allow it to slide more freely.
Retaining Ring
Roof Ring
Roof
Ceiling Plate
Lock Washer
¼ inch Bolt
Gasket
Nut