Will Burt 10-60 HDL, Руководство по эксплуатации

Страница: 125 / 166

PAGE 123 OF 164
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
TP-5580101-A
FEBRUARY 2022
a. 7-30: Use 16 AWG stranded wire (customer-supplied) to connect the flasher and lights to
the wires exiting the magnetic switch assembly (Figure 5-32).
Figure 5-32 Wire the Magnetic Switch Assembly Kit
b. 7-42, 9-50, 10-60, 10.3-60, 10.8-76, 8-39, 11.3-59, 9.8-65.6, and 14.3-80: Use 16 AWG
stranded wire (customer-supplied) to connect the flasher, lights, and relay to the wires
exiting the magnetic switch assembly (Figure 5-33 and Figure 5-24).
Figure 5-33 Wire the Magnetic Switch Assembly Kit
Customer-Supplied String or Wire. Remove Excess.
Magnetic Switch Assembly
“MAGNETIC SWITCH ASSEMBLY KIT” Label
Flasher Lights
“NOTICE” Label
Hose Clamp
Magnet
3 Amp Fuse Ignition Switch Vehicle Battery
Customer-Supplied String or Wire. Remove Excess.
Magnetic Switch Assembly
“MAGNETIC SWITCH ASSEMBLY KIT” Label
Relay Flasher Lights
“NOTICE” Label
Hose Clamp
Magnet
3 Amp Fuse Ignition Switch Vehicle Battery