Glass and Material Lift
GML 800+
44
Operating Manual
GML 800+
Before loading, familiarise yourself with the requirements for the loading methods as well as for the
vehicles/trailers for lift transportation. Read and adhere to the respective conditions.
Transport vehicle/trailer:
1.
Ensure that the transport vehicle/trailer must be
positioned on a firm, flat and level surface.
2.
Ensure that the transport vehicle/trailer
must be appropriately secured to avoid
rolling while the lift is loaded.
3.
Ensure that the transport vehicle/trailer:
-
is big enough
-
has sufficient SWL/ towing capacity
-
has been provided with sufficient securing
points.
Trailers with a ramp:
1.
Follow steps 1-3 of the section
‘Transport vehicle/Trailer ‘.
2.
When using a ramp ensure that it
-
has sufficient load bearing capacity
-
is stable enough
-
cannot be bent/damaged
-
is secured to avoid slipping
Loading attachment:
1.
When loading with a
crane/forklift
ensure
that the lifting capacity of the crane/ forklift is
sufficient in order to be able to load safely.
2.
Ensure that the applied
belts/chains
for
raising loads are without damage and have
sufficient dimensions for the weight of the
lift.
3.
Ensure that the weight specifications of the
lift on the name plate of the chassis
or/and the technical data within this
operating manual.
Load safety:
1.
The lift must be sufficiently secured by
belts/chains while being transported.
2.
Ensure that the applied belts/chains employed
for safe loading are without damage and
have sufficient dimensions.
3.
Ensure that the lift is properly secured and
that the belts/chains
DO NOT COME
INTO CONTACT WITH THE MAST
SYSTEM.
4.
Ensure that
the mast system is free of
any obstructions and not put under
strain by e.g. the belts/chains etc.
Loading and Transportation.
Basic Procedures.
