Wienold Lifte GML /10 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 52

background image

Copyright

©

Norbert Wienold GmbH 2015. All rights reserved.

Glass and Material Lift

GML 800+

3

Basic Procedures

Please read and comply with:

The manufacturers instructions and safety regulations.

The operating and safety instructions for this lift.
The inscriptions, labels and warning signs on this lift.

The safety instructions and operating instructions at the job site.
The current, local and legal safety regulations.

This lift meets the current CE regulations and norms,
EN ISO 12100, as well as the machinery directive
2006/42/EG, when used and operated in accordance to
the manufacturers recommendations.

It is the sole responsibility of each operator to adhere to
all regional rules and regulations concerning the safe
usage of this lift.

Please read carefully and follow all of the safety
instructions for this appliance before
maintenance, repair or operation.

This is in compliance with all the manufacturers
recommendations and all of the legal guidelines as
required by the government and local authorities.

To ensure safe and appropriate use of this lift, it may
only be used by persons who have been trained by
authorised specialists and who have been granted
operative authorisation.

Repairs and maintenance of this lift should only to
be undertaken by qualiﬁed and trained personnel
without exception.

This lift is subject to an annual UVV-inspection by an
authorised tester. Without a current UVV-test seal this lift
must not be operated.

The owners and anyone hiring/borrowing this lift should
have all construction parts undergo a complete inspection.
All of the lifts functions must be thoroughly examined and
inspected before sale or lease takes place. Damaged and
malfunctioning parts must be repaired or replaced.

This operating manual is an essential requirement
for all operators of this equipment. For this reason,
it must always remain in its appropriate place on
the lift and always be readily available.

Norbert Wienold GmbH is constantly developing and
improving this and other Wienold products.

For this reason, our appliances and products may be
subject to modiﬁcation without prior notice.

If you have any questions or queries, or if you notice any
mistakes and/or deviations concerning the contents of this
operating manual, please do not hesitate to contact us.

Contact:

Waldstr. 35a

D-48488 Emsbüren

Germany

Tel.: +49 5903 - 9394-0

Fax: +49 5903 - 9394-50

[email protected]

-

.de

«
1
2
3
4
5
...
»

Содержание GML /10





















































Отзывы:

Нет отзывов

Похожие инструкции для GML /10

Бренд: Vector Welding Страницы: 81

Бренд: 2N Страницы: 4

Бренд: Lathem Страницы: 4

Бренд: IN-COMMAND Страницы: 47

Бренд: Orion Welders Страницы: 51

Бренд: liquidarc Страницы: 36

Бренд: Quality Heating Страницы: 15

DIGITECH vision PULSE 3000

Бренд: CEA Страницы: 100

Бренд: M-system Страницы: 4

Бренд: DSC Страницы: 4

Transcmig 250se

Бренд: CIGWELD Страницы: 41

Бренд: Ravaglioli Страницы: 68

SAM GENERATION 2

Бренд: HALE Страницы: 12

Бренд: WIA Страницы: 44

EVO SPEED STAR 380 TC

Бренд: Cebora Страницы: 212

Бренд: Lifter Страницы: 170

UltraTwin FreeSpan

Бренд: Liko Страницы: 10

FCU-EXT-APP-CONTROL

Бренд: Fasel Elektronik Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды