Glass and Material Lift
GML 800+
36
Operating Manual
GML 800+
Set up the lift on firm and level ground only.
Ensure that all caster safety brakes on the chassis are engaged during set up.
Aligning the
carriage:
a)
Unlocking the
safety bolt:
b)
d)
Securing and releasing the safety bolt:
c)
Carriage
Secured
1.
In order to install the lifting fork easily to the
carriage, bring the carriage (a) to a suitable
height by winding the winch (b).
2.
Release the splint (c) to enable removal of
the safety bolt (d).
Installing the lifting
fork from UNDERNEATH: :
(Low loading height)
d)
Installing the lifting
fork from ABOVE:
(More lifting height)
d)
3.
Remove the disengaged safety bolt (d)
completely from the carriage.
4.
Install the lifting fork on the carriage from
underneath. Align the slots on the lifting
fork with those on the carriage.
5.
When both slots are at the same height,
insert the safety bolt through the carriage
and the loading accessory.
6.
To secure the bolt, vertically install the splint
(=“secured “position).
3.
Remove the disengaged safety bolt (d)
completely from the carriage.
4.
Install the lifting fork on the carriage from
above. Align the slots on the lifting fork wi
those on the carriage.
5.
When both slots are at the same height,
insert the safety bolt through the carriage
and the loading accessory.
6.
To secure the bolt, vertically install the splint
(=“secured “position).
WARNING:
Ensure that the forks of the lift
are not bent or damaged prior to use!
Standard Loading Device Installation
Fitting/removing a lifting fork or crane outrigger to/from the carriage
Lifting fork
Slots on
Lifting fork
aligned!
Lifting fork
Slots on
Lifting fork
aligned!
th
