Glass and Material Lift
GML 800+
21
Operating Manual
GML 800+
Noncompliance with the instructions and safety regulations in this
operating manual may result in death or serious injury!
Do Not Operate Unless:
The personnel have been trained on this type of unit
and are deemed competent. All operators should read
the operating manual carefully.
1.
Avoid hazardous situations.
Know and understand the safety regulations
before going on to the next section.
2.
Always perform a pre-operation inspection on
the lift.
3.
Inspect the working area thoroughly before
using the lift.
4.
Always perform the function test as per the
operating manual prior to use.
5.
Only use the lift as per the operating instructions.
Any deviations are not acceptable. In this case,
you must always contact the owner of the
equipment.
Fundamentals
The function tests are designed to identify malfunctions
before the lift goes into service.
The operator must follow the step-by-step instructions and
test all lift functions.
A malfunctioning lift must not be operated under any
circumstances.
If any malfunctions are discovered the lift must be removed
from service and appropriately tagged. Further use of the lift
is prohibited.
Repairs to the lift may only be undertaken by a qualified service
technician in compliance with the manufactures specifications.
When repair work has been successfully completed the operator
must perform another pre-operation inspection and repeat
the function tests. Only then may the lift be operated.
Read, understand and adhere to
:
a)
the manufacturers instructions and safety instructions.
b)
the operating manuals and safety instructions for the lift.
c)
the inscriptions, labels and warning signs on the lift.
d)
the safety instructions and work procedures on the job site.
e)
the relevant legislation in force for the equipment in use.
Function Tests
