Glass and Material Lift
GML 800+
24
Operating Manual
GML 800+
Do Not Operate Unless:
The personnel have been trained on this type of unit
and are deemed competent. All operators should read
the operating manual carefully.
1.
Avoid hazardous situations.
Know and understand the safety regulations
before going on to the next section.
2.
Always perform a pre-operation inspection on
the lift.
3.
Inspect the working area thoroughly before
using the lift.
4.
Always perform the function test as per the
operating manual prior to use.
5.
Only use the lift as per the operating instructions.
Any deviations are not acceptable. In this case, you
must always contact the owner of the equipment
.
Fundamentals
Using the lift for anything other than lifting loads is unsafe.
If more than one operator is expected to use the lift at different
times during the same work shift, ensure that each operator
is trained and follows all of the safety regulations and instructions
in the operating manual.
Ensure that all new lift operator know and adhere to the safety
regulations and instructions described in the previous chapters
before operating the lift.
The following tasks must be undertaken by each operator
before initial operation:
-Read and understand this operating manual
-
Pre-operation inspection
-
Function tests
-
Working area inspection
-
Operating instructions
-
Compliance with and application of the information
in the load capacity chart
Operating Instructions
