widos 8000 WM SPA, Перевод инструкций по эксплуатации

Страница: 37 / 114

Operating and indicating elements Chapter 4
09.06.15 Working Instructions WIDOS 8000 WM SPA page 37 of 108

Screw the two ring bolts (acc. to the image) into the large upper part; thus
they will be hanging almost horizontally.

Hinge the small upper parts to the three ring bolts using a lifting device and
lift the upper parts down.

Insert the pipes prepared for T-welding into the lower clamping tools.

Lift the upper clamping tools onto the inserted pipes, swing the spindles with clamping nuts and pressure
discs upwards and clamp the pipes with the clamping nuts.
4.13.1.
How to support the pipes (optional)
The lower clamping tools feature the limit stops for the pipes mounted by pan-head screws.
The limit stops keep the pipes in axial direction even at higher pressures.
You can displace the limit stops to the outside with longer pan-head screws and counternuts.
Lifting eye bolts
Clamping tool upper part large
Limit stop for pipe