widos 8000 WM SPA, Перевод инструкций по эксплуатации

Страница: 57 / 114

Welding process Chapter 6
09.06.15 Working Instructions WIDOS 8000 WM SPA page 57 of 108
6.2.6. Heating up
Reduce pressure, press <button 17, > the SPA control switches to heating.
Display:
2nd line:
heat up
t=54s Pi=0
Display of:
Remaining time for heating and actual pressure
alternating with:
Display:
2nd line:
heat up
T=210°C Pi=0
Display of:
heating element temperature and actual pressure
Activate table limitation with <switch 16,
>
, the switch illuminates.
At the end of the heating time, the button <Enter> flashes and a beeping sound can
be heard.
6.2.7. Change over
Press button <Enter>.
Open tables up to limitation, <joystick 13> on: , the heating element detaches
from both pipe ends.
Move heating element out of the machine quickly, <joystick 5> on: .
Close basic machine again within the change over time, <joystick 13> on: .
Display:
2nd line:
change over
t=4s Pi=0
Display of: Remaining change over time and actual pressure
6.2.8. Pressure ramp
Constantly raise pressure within the prescribed pressure built-up time up to nominal
pressure. Hold the <joystick 13> just for about 10 s on: in order that the hydraulic
accumulator may fill up.
Display:
2nd line:
ramp
t=2s Pi=6
Display of:
Heating element temperature and actual pressure