widos 8000 WM SPA, Перевод инструкций по эксплуатации

Страница: 20 / 114

Operating and indicating elements Chapter 4
09.06.15 Working Instructions WIDOS 8000 WM SPA page 20 of 108
No. Denomination Function
2 Buttons for operation
(optional)
- Drag pressure measurement;
- to set the pipe data and project number;
- to set the type of the machine;
- to print the welding data;
- Diagnosis menu;
- to reset to the previous item of the menu
3 Turning switch 0 / I - to switch the heating element on <I> and <0> off
4 Temperature regulator - to set the heating temperature
5 Joystick heating element
- Heating element out of machine
- Heating element into machine
6 Joystick Planer
- Planer out of machine
- Planer into machine
- Planer rotate (planing pipes)
7 Joystick (cylinder 1) left
clamping tool
- To open left clamping tool
- To close left clamping tool
- To clamp left clamping tool (option)
- To release left clamping tool (option)
8 Joystick (cylinder 2)
clamping tool (optional)
- To open clamping tool
- To close clamping tool
- To clamp clamping tool (option)
- To release clamping tool (option)
9 Joystick (cylinder 4) right
clamping tool
- To open right clamping tool
- To close right clamping tool
- To clamp right clamping tool (option)
-
To release right clamping tool (option)
10 Joystick (cylinder 3)
clamping tool (optional)
- To open clamping tool
- To close clamping tool
- To clamp clamping tool (option)
-
To release clamping tool (option)
11 Pressure gauge - Pressure indication [bar]
12 Pressure controller - Adjust bead-up pressure (Reading: on pressure gauge)
13 Joystick tables
- To close tables for bead-up
-
To open tables
-
To close tables for joining / cooling
-
To close tables for planing
14 Pressure controller
-
Adjust welding pressure (Reading: on pressure gauge)
15 Pressure controller
-
Adjust planing pressure (Reading: on pressure gauge)