widos 25000 mobile, Перевод инструкций по эксплуатации

Страница: 14 / 120

Kunststoffschweißtechnik
Safety rules Chapter 2
07.02.13 Working Instructions WIDOS 25000 mobile Page 14 of 116
2.7. Maintenance and inspection, repair
All maintenance and repair work have to be basically performed with the
machine in off position.
During this the machine has to be secured against unauthorized switching on.
Prescribed maintenance and inspection work should be performed in time.
The DVS gives the advice of inspection work after 1 year.
For machines with a specially high usage percentage the testing cycle should be
shortened.
The work should be performed at the WIDOS GmbH company or by an
authorized partner.
2.8. Dangers while handling the machine
The machine WIDOS 25000 mobile has been constructed according to the latest technical
standard and the acknowledged technical safety rules.
However, dangers for the operator or other persons standing nearby may occur. Also material
damages are possible.
The machine may only be used

according to the purpose-oriented usage

in safety technical impeccable status
Disturbances which may affect the safety of the machine must be cleared immediately.
2.9. Dangers caused by electric energy
Only skilled persons are allowed to work at electrical appliances!

The electrical equipment of the machine has to be checked regularly.

Loose connections and damaged cables have to be replaced immediately.

If work at alive parts are necessary, a second person has to assist who can disconnect the
machine from the mains if necessary.

The machine has to be protected from rain and dropping water.

According to VDE 0100, the use on construction sites is only allowed with a power
distributor with a FI-safety switch.

Especially take care during the installation of the carriage, depending on the transport
condition etc. that the lines are stored on the shelves and cannot get jammed.