widos 25000 mobile, Перевод инструкций по эксплуатации

Страница: 15 / 120

Kunststoffschweißtechnik
Safety rules Chapter 2
07.02.13 Working Instructions WIDOS 25000 mobile Page 15 of 116
2.10. Specific dangers
2.10.1. Danger of stumbling over electric / hydraulic wires

Make sure that no person has to step over the wires.

Do not bend or jam the wires and cables.

Lay the wires in such a way that the danger is kept to a minimum.

Especially take care during the installation of the carriage, depending on the
transport condition etc. that the lines are stored on the shelves and cannot
get jammed.
2.10.2. Dangers caused by the hydraulics
System parts and pressure hoses should be depressurized before the beginning
of any repair work. Even if the machine is switched off, pressure may be in the
hydraulic accumulator!
There is a danger of injuring the eyes by hydraulic oil squirting out.

Damaged hydraulic hoses have to be immediately replaced.

Make a visual inspection of the hydraulic hoses before each work beginning.

The hydraulic oil is inedible !
2.10.3. Danger of combustion by heating element and welding area
You can burn yourself, inflammable materials can be ignited.
The heating element temperature is heated up to more than 250 °C!

Do not leave the heating element unsupervised.

Do not touch the surfaces of the heating element.

Take care that you do not remove resp. fold the heat protection film.

Take enough safety distance to inflammable materials.

Do wear safety gloves.

Make sure that no person is in the driving range of the heating element.

When cleaning the hot heating element with detergents (e.g. with PE cleaner) there is the
danger of inflammation. For this reason, please take care that the inflammation point is
above the actual temperature of the heating element.

Do not bring any fire sources (e.g. cigarettes) close thereto.