widos 25000 mobile, Перевод инструкций по эксплуатации

Страница: 9 / 120

Kunststoffschweißtechnik
Description of the product Chapter 1
07.02.13 Working Instructions WIDOS 25000 mobile Page 9 of 116
1.5. Designation of the product
The product is designated by type labels which are attached at the crane, at the aggregate, at
the heating element, at the planer and at the basic machine.
They contain the type, the serial number and the year of construction of the machine.
1.5.1. Technical data
All important technical data of each single component are displayed.
They allow rapid information about the working capacity and the structure.
1.5.1.1. WIDOS 25000 mobile General data
Pipe diameter range: OD 1600 mm (optional) – OD 2500 mm
Material which can be welded: PP, PE 80, PE 100
Weight: appr. 27 t, complete including accessories
Emissions
-
Noise occurs over 80 dB (A); when working with
the machine it is obligatory to wear ear protection!
- When using the named pipe materials and when
welding below 260 °C no toxicant damp arises
Ambient conditions in the welding
area: - take care for cleanness (no dust at the welding
area)
-
If secured by an appropriate measurement that
allowed conditions for welding are indicated, it is
possible to work in any outside temperature
condition as far as the welder is not constrained in
its manual skill.
-
avoid humidity, if necessary use a welding tent
- avoid strong sun rays influence
-
protect from wind, shut pipe ends
Feeding CEE 125 A; 83 kW; 400 V; 50 Hz
1.5.1.2. Basic frame
Material frame: Structural steel
Material reduction inserts: Steel
Ø cylinder / Ø piston rod (4 pieces): 100 mm / 60 mm
Stroke length of cylinder: 1400 mm
Max. force (F=P*A): 201,06 kN (at p= 100 bar)
502,65 kN (at p = 250 bar)
Length (wide) appr.: 7450 mm including carriage
7145 mm without carriage
Height appr.: 4955 mm including carriage and open clamping ring
4400 mm without carriage and open clamping ring
Depth appr.: 8255 with open clamping rings