widos 25000 mobile, Перевод инструкций по эксплуатации

Страница: 45 / 120

Kunststoffschweißtechnik
Starting and operating Chapter 5
07.02.13 Working Instructions WIDOS 25000 mobile Page 45 of 116
5.3.2. SD – card and drive
The unit CNC 3.0 has a drive for a SD - card.
The machine stores the welding data in the internal memory as well as on the SD – card if a
card is in the drive.
On a card with 64 MB memory capacity, the welding data of about 32,000 weldings can have
place.

The SD card must be formatted by “FAT 16” necessarily before usage.

Insert the card with its inscription to the top carefully and with low force into the reading
unit.

The card can be read out with a WICON program.

The card may not be bent, opened, overheated and become wet!
Please only use SD cards purchased from WIDOS. We will not be liable for any
cards from other manufactures!
5.3.3. Read-out WICON with USB card reader (optional)
You may read out the welding data onto a PC by the USB card reader.
Remove the card from the SD card drive of the CNC - aggregate.
Remove the rear cap and plug card
according to the image into the USB card
reader.
Remove the front cap and plug USB card
reader into the USB interface in your PC.
As soon as the USB card reader has been
plugged, it appears as removable medium
in the drive list.
Open the WIDOS folder, there you will
find:
- WICON2000 viewer for considering and
printing the welding data,
- working instructions for WICON2000
viewer as PDF file.