page 2 – 5
AM-55 / Sep 2015
F R O N T P A N E L
Headphone
The
Headphone
submenu gives you the option of adjusting the headphone volume
as well as selecting the monitoring source.
Source Selection
The first option is the monitoring source. To change the source, push in the knob and
turn it to scroll through the options. Once you have arrived at the monitoring source you
would like to hear, push the knob in. The monitoring options are:
• Input – The active input selected, either AES, WheatNet-IP or Analog)
• Analog Input (“Ana Inp”)
• Digital Input (“Dig Inp”) – Depending on the AES input selected on the input
menu. If AES is selected you will hear the AES input. If WheatNet‑IP is selected,
you will hear that.
• AM Output (“AM Out”) – The AM out option allows you to monitor the processed
signal. The audio is peak controlled and pre‑emphasized.
Once the source has been selected by pressing in the knob, the front panel will exit
the source selection mode.
Headphone Volume
To adjust the volume level, turn the knob to the second option and push the knob.
You can then adjust the volume to a safe and comfortable level by turning the knob.
Once complete, push the knob to exit the adjustment mode.
To return to the main menu, press the “W” BACK button.
Presets
The
Preset
submenu allows the user to pick any of the factory or user presets that
are loaded onto the hardware. To select a preset, turn the knob to highlight it and then
push the knob in to activate the preset.
To return to the main menu, press the “W” BACK button.
Management of presets on the hardware can be accomplished via the PC GUI program
that communicates with the AM‑55. You can add, delete and back up presets from the
GUI. For more information about preset management with the GUI, please see page 3‑36
of this manual.
Input
The
Input
submenu allows you to change the input source to the processor as well
as adjust the input levels for each source independently.
Input Source
The first option is input source. To select the input source, highlight “input src” and
push the knob in. Turn the knob to select the option you wish to place on air.
