Westomatic Eco Encore, Техническое руководство

Страница: 73 / 150

72
5. Increase or decrease the amount of water by carefully adjusting the mains
water regulator for the BTC unit, (positioned under the Freshbrew unit) until
the minimum 10.0 fl/oz or 295ml of water is dispensed for a 15 second
throw time. (This should equal around three turns of the regulator).
Step 3 - Setting Water Volumes
Setting the BTC water flow rate
For all BTC machines to help achieve good quality drinks at least 10.0 fl/oz or 295ml
of water is required, this equates to a 22 second throw time set within address 706.
To achieve the recommended flow rate of water through the grinder, adjust the
water regulator for the grinder, this is located on the right hand side of the water
inlet assembly.
Checking the Water Volume Dispensed from the Boiler Valves
Please note that this procedure is particularly important if the valves have been
changed or de-scaled.
Example: for VALVE 1
1. In service mode enter address = 556:
2. Look at the throw time within the address (9 seconds)
3. Have measuring jug or a 7oz squat cup ready
4. Press the blank key on the keypad (alarm will sound for 5 seconds)
5. Water will be dispensed
6. Volume should be 5.4fl/oz or 159.3ml
7. If the volume is incorrect adjust the thumb adjuster on the water delivery
valve – turn clockwise to increase water volume, anti-clockwise to decrease
8. Check again until the volume is correct
Repeat this process for each valve as follows:
VALVE 2 – address 640 (9 seconds), 5.4fl/oz or 159.3ml
VALVE 3 – address 476 (5.7 seconds), 3.4fl/oz or 100.89ml
VALVE 4 – address 483 (3.3 seconds), 1.9fl/oz or 58.41ml
VALVE 5 – address 681 (4.5 seconds), 2.7fl/oz or 796.5ml