Westomatic Eco Encore, Техническое руководство

Страница: 72 / 150

71
14. BEAN TO CUP DRINKS SETUP
The following section provides an in depth guide for setting up the bean to cup (BTC)
system for the Solo Encore.
Step 1 – Drink Quality
It is Important to note, prior to any set-up or adjustments to the machine to
achieve the delivery of good bean to cup coffee, you must ensure that,
FRESH BEAN ARE USED, WE RECOMMEND BEANS BE CHANGED
EVERY 3-4 DAYS.
If you change the type of beans (product brand or roast type) during regular
operation the brewer will need to be adjusted.
Step 2 - Setting Flow Rates and Volumes
Set the Water Valves from the Boiler
Confirm all the water valves are set correctly to 0.6fl/oz or 17.7ml per second
by following the instructions below, before continuing with any other part of the
set up.
VOLUME MATRIX
This matrix shows the volume of water you should expect to see if the machine
is set at 0.6 fl/oz or 17.7ml per every second display on the machine.
Water Flow Rate = 0.6 fl/oz or
17,7ml
Per sec.
Water Flow Rate = 0.6 fl/oz or
17,7ml
Per sec.
Water Flow Rate = 0.6 fl/oz or
17,7ml
Per sec.
Time
in
Seconds
Water
Volume in
fl/oz
Water
Volume
in ml
Time
in
Seconds
Water
Volume in
fl/oz
Water
Volume in
ml
Time
in
Seconds
Water
Volume
in fl/oz
Water
Volume in
ml
1.0 0.6 17.7 9.0 5.4 159.3 17.0 10.2 300.9
2.0 1.2 35.4 10.0 6.0 177.0 18.0 10.8 318.6
3.0 1.8 53.1 11.0 6.6 194.7 19.0 11.4 336.3
4.0 2.4 70.8 12.0 7.2 212.4 20.0 12.0 354.0
5.0 3.0 88.5 13.0 7.8 230.1 21.0 12.6 371.7
6.0 3.6 106.2 14.0 8.4 247.8 22.0 13.2 389.4
7.0 4.2 123.9 15.0 9.0 265.5 23.0 13.8 407.1
8.0 4.8 141.6 16.0 9.6 283.2 24.0 14.4 424.8
The easiest method of measuring the amount of water going into the BTC
brewer is to:
1. Enter service mode address 706 (value shown should be around 22 sec).
2
. Caution: Take care the water dispensed will be very hot.
3. Have a measuring jug or at least two cups ready to collect and measure the
volume of water dispensed.
4. Press the ‘blank’ key on the keypad.