Westell AISG-RM3, Руководство пользователя

Страница: 21 / 22

Section AIS‐RM3‐20B
030‐101806 Rev. A
R
1310IBRA 21
11. WARRANTY & REPAIRS
11.1 Warranty
Westell warrants this product to be free of defects at the time
of shipment. Westell also warrants this product to be fully func­
tional for the time period specified by the terms and conditions
governing the sale of the product. Any attempt to repair or
modify the equipment by anyone other than an authorized
Westell representative will void the warranty.
11.2 Repair and Return
Westell will repair or replace any defective Westell equipment
without cost during the warranty period if the unit is defective
for any reason other than abuse, improper use, or improper
installation. To return defective equipment, first request a Re­
turn Material Authorization (RMA) number from Westell by
calling or using one of the options shown below. Once an RMA
number is obtained, return the defective unit (freight prepaid),
along with a brief problem description, to the address we will
provide to you when you contact us.
Voice: (630) 375‐4457
email: rgmdept@westell.com
Replacements will be shipped in the fastest manner consistent
with the urgency of the situation. Westell will continue to repair
or replace faulty equipment beyond the warranty period for a
nominal charge. Contact Westell for details.
‐
TL9000 RECYCLING NOTE
‐
Westell recommends that its products be recycled at the end of their
product life. For Westell products that have reached their product End Of
Life (EOL), please recycle and dispose of the products per your company
practice, per local recycling programs and local codes, and per state
statutes.
12. SPECIFICATIONS
12.1 Electrical Specifications
A.
Power supply input: DC: 24V / max. 3.2A or ‐48V / max.
1.6A
B.
Power supply to AISG devices: +24V / max. 2.0 A,
+12V / max. 4.0 A
C.
Max. Output to AISG devices: 50 W
D. Protection: Surge
E.
LEDs: Alarm, Run, Power
12.2 Regulatory/Agency
A. CE, FCC, RoHS
12.3 Communication and Control
A.
Protocol to RET & TMA: AISG 1.1 & v2.0
B.
Network interface: Ethernet 10/100 Mbps
C.
Network protocols: TCP/IP and HTTP
12.4 Physical Specifications
See Figure 52 and Table 18 for the physical specifications.
Physical Feature U.S. Metric
Height (1‐RU) 1.72 in 4.37 cm
Width (without ears) 8.70 in 22.10 cm
Depth (with connect­
ors) 7.60 in 19.30 cm
Weight
(approximate)
3.31 lbs 1.5 Kg
Temperature range 32
_
to 131
_
F 0
_
to 55
_
C
Humidity 0 to 95% (non‐condensing)
AISG connectors 3 AISG female connectors
Communication port RS232 connector
Max. # of TMAs or RETs Up to 24 antenna line devices
Color Off‐white
Mounting 19/23” Racks (1 RU), wall or desktop
Table 18. Physical Specifications
12.5 Ordering Specifications
To order units, call the telephone number shown in Part 10 and
please specify the part number shown in Table 19.
Model # Description
B99‐AISG‐RM3 Rack‐mount, 3‐port, AISG antenna
line device controller.
Table 19. Ordering Information
13. ACRONYMS & ABBREVIATIONS
The following acronyms, abbreviations, and trademarks are
found in this practice.
A ‐ Amps
AISG ‐ Antenna Interface Standards Group
ANT ‐ Antenna
BPF ‐ Band Pass Filter
BTS ­ Base Transceiver Station
C ‐ Celsius
CIM ‐ Current Injector Modem (sometimes called
“Smart” Bias­T)
dB ‐ Decibel
DC ‐ Direct Current
DIN ‐ Deutsches Institut fur Normung
eNodeB ‐ Evolved NodeB. LTE equivalent of BTS
F ‐ Fahrenheit
FET ‐ Field Effect Transistor
ft. Feet or Foot