Section AIS‐RM3‐20B
030‐101806 Rev. A
R
1310IBRA
10
Click on the OK button to initiate the scan process.
This process may take a while to complete depending on the
number of connected devices. Once the scan is completed, the
Device List will be updated. Click on the Close button.
Before navigating to other web pages, store the device informa
tion on the AISG‐RM3 controller by clicking on the Save button.
If you forget to do so, you will be prompted when you click on
another panel.
Click on the OK button to save device information before mov
ing on.
5.1.2
Add a Device
Click on the Add Device button in the
Device Status
menu to
manually add a specific device which was not recognized by the
scan process. The following Add Device dialog appears.
Enter the serial number of the device you are adding. The
Vendor Code is optional. Click on the Add button to initiate the
process.
If the process is successful, the Device List will be updated. Save
the device information before moving on.
5.1.3
Refresh Operation
Click on the Refresh button in the Device List panel to retrieve
the latest device information.
Figure 25. Refreshing to Retrieve Latest Device Info
When the process is finished, close the message window.
5.1.4
Save Operation
Click on the Save button to store the device information in the
AISG‐RM3 controller.
Figure 26. Saving to Store Device Information
After the process is done, close the message window.
5.1.5
Reset a Device
Use the Reset function on a device that is not operating nor
mally. Reset causes the software on the device to restart and
place it in a state of initialization. Reset may clean device alarm
status temporarily. Click on the Reset button for the device that
you want to reset.
Figure 27. Resetting a Device
Wait for the process to finish.
