Westell AISG-RM3, Руководство пользователя

Страница: 20 / 22

Section AIS‐RM3‐20B
030‐101806 Rev. A R
1310IBRA 20
Code Message Alarm Description
0x00 OK
0x01 Actuator Detection Fail X
0x02 Actuator Jam Permanent X
0x03 Actuator Jam Temporary X
0x04 Block Number Sequence Error
0x05 Busy
0x06 Checksum Error
0x07 Command Sequence Error
0x08 Data Error
0x09 Device Disabled
0x0A EEPROM Error X
0x0B Fail
0x0C Flash Erase Error X
0x0D Flash Error X
0x0E Not Calibrated X
0x0F Not Scaled X
0x11 Other Hardware Error X
0x12 Other Software Error X
0x13 Tilt out of Range X
0x14 Position Lost X
0x15 RAM Error X
0x16 Segment Number Sequence Error
0x17 UART Error X
0x19 Unknown Command
0x1A TMA Alarm Minor X
0x1B TMA Alarm Major
0x1C Gain out of Range
0x1D Read Only
0x1E Unknown Parameter
0x1F Bypass Mode
0x21 Software Missing
0x22 Invalid File Content
0x24 Format Error
0x25 Unsupported Proc
0x26 Invalid Proc Sequence
0x27 Actuator Interference X
0x51 Uninitialized X Cannot get device information after a scan process.
0x52 Bad Responding X Bad communication between the AISG‐RM3 system and the device.
0x53 No Responding X Lost connection between the AISG‐RM3 system and the device.
0x54 Function Fail Unexpected result from the AISG‐RM3 system.
0x59 Timeout The response time from the device to the AISG‐RM3 has timed out.
0x70 Default Result Unexpected or unknown result.
0x71 Error General error.
0x72 File I/O fail File access fails.
0x73 System Timeout Waiting for response from the AISG‐RM3 has timed out.
0x77 Add device fail Failed to add a device.
0x78 Value is empty Input field does not allow empty value.
0x79 Field name is null! Invalid field name is used on the web interface.
0x7A Antenna model config file does not exist! The antenna configuration data file doesn't exist.
0x7B Device exists! The device already exists in the AISG‐RM3 system.
0x7C Size is too large! The file size of antenna configuration data is too large.
0x7D The max. number of files reached! The number of antenna configuration data files has reached the limits defined in the
controller system.
0x7E Total file size exceeds The total file size of antenna configuration data files in the controller system has
reached the limits defined in the system.
Table 17. Error and Alarm Codes