Section AIS‐RM3‐20B
030‐101806 Rev. A
R
1310IBRA
19
8.
PERFORMING FIRMWARE UPGRADES
Follow the steps below to perform firmware upgrades for the
controller.
1.
From the
System Setting
click on the [Software Upgrade] button (Item #2). In the
subsequent pop‐up screen, browse and choose the firm
ware to be upgraded (Item # 3). Press the [Start Software
Upgrade] button (Item #4) to start the software upgrade.
2.
Upgrading will take about 20 seconds, depending on the
network speed for uploading the firmware. Once finished,
perform a manual reboot of the controller.
3.
Refresh the browser to reload the user interface; you will
find the changed/upgraded firmware.
9.
ERROR & ALARM CODES/MESSAGES
The following (Table 17) are the error codes and alarm codes
and messages for the controller. Please refer to AISG standard
for the description of codes 0x00 ~ 0x27.
10.
CUSTOMER & TECHNICAL SERVICES
If technical or customer assistance is required, contact Westell
by calling or using one of the following options:
Voice: (800) 377‐8766
email:
For additional information about Westell, visit the Westell
World Wide Web site at http://
Figure 51. Rebooting After Software/Firmware Upgrade
1.
2.
