Wenger V-Ready, Руководство по сборке

Страница: 11 / 36

11
wall panel alignment
iNSTallaTiON
CONTiNuEd
1. As panels are put in place, make sure that the Wall Panels are even at the top.
a. Run fingers across the center of the Wall Panels between gaskets to check for evenness
(not across the Panel skins because they vary slightly in size and appear to be uneven).
b. Look under each Wall Panels and make sure of a seal to the Wall Frame. If there is light, the
Panel is not sealed.
c. If a gap is evident between a Wall Frame and Wall Panel, the Wall Panel must be readjusted.
These surfaces
must be flush
Wall Panel
Wall Frame
No Cracks Allowed
install corners
Corners are roto locked to Panels and should be checked with a Box Level to be sure the corner is
plumb before the next Wall Panel is attached.