Wenger V-Ready, Руководство по сборке

Страница: 19 / 36

19
ceiling clips
The ceiling clips are inserted from the corners of the
module where a space is in the ceiling frame rail.
The short leg of the clip is inserted into the channel
of the ceiling panel while the long leg slides into the
formed channel of the ceiling frame rail. Clips are
then slid in the rail to proper position. Place one clip
in the center of each ceiling panel end. On the long
side of the ceiling panel, place clips every 15-inches
to match pattern of clips on ends of ceiling panels.
At all four corners, place one clip in each direction,
but within the first 7 1/2-inches of corner for proper
seal. Do not place a clip on the ceiling rail splices.
clip retainers
When ceiling clips are in place, insert the clip
retainers. Lay the retainers on the ceiling rail
channel directly in front of each clip. Press the
retainer straight down into the bottom of the rail.
Insert one retainer for each clip using an adjustable
jaw pliers or Wenger clip retainer tool.
(Part No. 115_204)
This unit is now structurally complete.
iNSTallaTiON
CONTiNuEd
Clip
Clip Retainer