Wenger V-Ready, Руководство по сборке

Страница: 16 / 36

16
The vertical lip of the ceiling rail system must be nearly even with the outside of the Wall
Panels.
1. Before the Bolts are tightened, make sure the alignment of the outside surface of the Wall Panel and
the vertical lip is correct. This will cause a space behind the formed channel on the module’s interior.
2. All rails, corners and spacer joints must fit together perfectly. If they do not, the frame will not be
square and will need readjusting. The most important factor is that no gaps be allowed between any
or all ceiling rail pieces.
3. Use the Wenger Panel Adjustment Tool (215_945) if available to assist positioning the Wall Panels.
4. Tighten all bolts.
ceiling rail alignment
iNSTallaTiON
CONTiNuEd
3/32-inch
Approximately 3/32-inch
spacing on all four sides