Welcat GTX-100, Руководство пользователя

Страница: 92 / 171

3-10 Network Menu
3-37
■Startup type
1. Select the item to setup.
5VCTVWRV[RG
Dz5[UVGOOGPWDQQV
Dz#RRNKECVKQPDQQV
ǽ &KUCDNGF
・ Disabled (Factory setup)
DHCP is not executed when the terminal started up.
・ Application boot
DHCP is executed before the application is executed.
The application file is selected from <System
menu>[1:System], and then[2:Auto execute], DHCP function
is executed before application , after the terminal started up. In
addition, when the application is started up from <File menu>,
DHCP is not executed.
・ System menu boot
DHCP is executed before System menu is started up. The Sys-
tem menu is selected from <System menu>[1:System], and
then[1:Auto execute], DHCP function is executed before Sys-
tem menu is started up , after the terminal started up.
■Update protect
Following information unique to the terminal is setup so as not to be modified, before executing
DHCP function.
・ IP address
・ NetMask
・ Gateway
・ ID
In the case when the check is applied to IP address (IP address up-
date is prohibited), the IP address, which has set up at the terminal, is
not modified. Be sure to use confirming that the there is no host with
the same IP address on the Network.
■Server port number
DHCP server port is setup (Factory setup
：
08067).
If you do not execute the automatic setup, which is unique to the GTX-100, and want to use existing
server only to perform the assigning of IP address, the value is modified (the well known port is 67).
The port number of the DHCP server of "WebGlider-X" Network
manager is 08067 as default. This is to avoid a competition with
other DHCP servers working in the same network.
■Execute
Press the key, and, DHCP is executed immediately, regardless of "Startup type"(P.3-37).