Welcat GTX-100, Руководство пользователя

Страница: 27 / 171

Chapter 1 Hardware
1-4
1-2 Preparation before Use
Please carry out following preparations before using the GTX-100
● Battery Pack GTB-1
The battery pack is required in order to use the GTX-100. The battery pack should be charged before
use, attached correctly and locked with the battery cover.
● Isn't the barcode window dirty?
If the barcode window is dirty, a barcode cannot be scanned correctly. When dirty, please wipe lightly
with a soft cloth etc.
● Isn't charging terminal dirty?
If the charging terminal is covered with dust or dirt, charging error or failure may occur. When dirty,
please remove the dust or dirt by using a swab etc.
1-2-1 Equipment Connections
Data entered can be transmitted from the GTX-100 to a host computer or the GTX-100 can receive data from a
host computer.
The following are the Methods for connecting to a host computer. Preparations required depend on the applica-
tion environment.
In the case of WLAN communication
P.1-8
The GTX-100 communicates via wireless LAN communi-
cation to a host computer through an access point, which is
connected to the Ethernet LAN.
■
Purchased Separately
Access Point (our recommended product)
Ethernet cables, HUB
For details about setting up a wireless network, refer to the
Access point Manual and the document.
In the case of Bluetooth communication
P.1-9
The GTX-100 communicates via Bluetooth communication
to a host computer through USB adapter, which is con-
nected to the USB port of the host computer.
■
Purchased Separately
Transfer Utility "BluePorter" (Bluetooth USB adapter is in-
cluded.)
Computer