Welcat GTX-100 Скачать руководство пользователя страница 153

Страница: 153 / 171

Chapter4 FAQ

4-4

Q: I cannot perform wireless data communications.

■ Is the access point connected to the Ethernet LAN?

If the LAN cable has fallen out or a link is not established, some access points do not perform

wireless communications.

<When the ALARM LED lights ON>
■ Is terminal SSID setting the same as the access point SSID settings?----(P.3-22)

Please set the access point SSID and terminal SSID the same.
When the terminal SSID is set to "ANY" (blank), it may be unable to connect because of the

access point functions. Refer to the access point manual for more information.

■Is the authentication setup correct?----(P.3-28)

Please set the access point Authentication System and terminal Authentication System settings

the same.
If in "SHARED" mode, please check the WEP settings.

<When ALARM LED turns off or blinks>
■ Are the WEP settings the same?

Are the WEP keys the same? ("Null," "40bits," "128bits")
Do the WEP's Tx KEY_ID and the WEP key match? (P.3-25)

■ Doesn't an access point with a same channel or interfering channel exist?

In the case where a non-interfering channel is set, a maximum of 4 access points can be used

in the one area.

■Isn't the wireless transmission being interfered by an obstacle?

Please check whether there is no equipment, such as a microwave oven or other WLANs etc,

which can cause interference.
Also, since a computer may act as a noise generation source, move the access point and termi-

nal away from the computer (1m or more).

■ Aren't there any problems with the TCP/IP settings (IP address etc)?----(P.3-35)

Check it to see if the terminal can connect to the computer by using the ping command etc.

Q: I cannot perform Bluetooth communication.

■ Has the Remote device to be connected set as default device?----(P.3-66)
■ Are the Remote device to be connected and the Security setting identi-

cal?----(P.3-64)

■ Has the Remote device to be connected setup correctly?

・

Does the Power turn ON?

・

Is the connecting enabled?

■ Is the connecting procedure correct?

・

Connect the PC and GTX-100 (P.1-9)

・

Communication between the GTX-100 terminals (P.3-46

～

46)

・

Bluetooth Clone (P.3-80)

・

Bluetooth Test (P.3-90)

Содержание GTX-100











































































































































































Результаты поиска

Содержание GTX-100

Отзывы:

Похожие инструкции для GTX-100

Бренды по названию

Популярные бренды

Welcat GTX-100, Руководство пользователя

Результаты поиска

Содержание GTX-100

Отзывы:

Похожие инструкции для GTX-100

Бренды по названию

Популярные бренды