Welcat GTX-100, Руководство пользователя

Страница: 73 / 171

Chapter 3 System menu
3-18
●Resume mode OFF
After the GTX-100 is powered OFF, the next time the key is
pressed, it will begin operation from the start.
When the application is setup to " Auto Execute", the assigned appli-
cation will startup.
In the case where the battery is disconnected while the power is ON,
the operation will begin from the start regardless of the resume
mode settings. In order to enable the resume function, turn ON/OFF
the power by pressing the key. However, even when the resume
function is enabled, the process will be performed from the begin-
ning if the Network DHCP setting
“
■Startup type
”
(P.3-37) is set to
“
Application boot
”
or
“
System menu boot.
”
3-8-4 Password
The password to avoid unnecessary running on of the System menu will be setup. By setting a password, the
third person other than the system administrator unable to confirm or modify the setup contents.
2CUUYQTF!
In case a password is setup, the password confirmation will be performed at the
time of starting up of the System menu. The System menu will not start up unless
the password is entered.
However, when the power OFF by pressing the key, with resume function
enabled, while System menu is displayed, the password check will not performed
when the terminal will restart from the System menu.
Be sure to take notes of the encryption number, and keep it so that
you may not forget it. In case you forget the number, please contact
our sales department.
1. From the System setup, select "4:Password".
2CUUYQTF
%NGCT
5GV
Select the item to setup.
・ Set
・ Clear