Welcat GTX-100, Руководство пользователя

Страница: 154 / 171

4-1 FAQ
4-5
Q: Can I use at the same time both WLAN and Bluetooth in the
same environment and on the same terminal?
You can use WLAN and Bluetooth at the same time, however the communication may be delayed
due to mutual interference between wirelesses.
Q: "Writing Failed" was displayed during transmission or re-
ception of a file.
■ This message is displayed when there is little space left on the F Drive.
Create some free space on the F drive by deleting unnecessary files then start again. If the free
space after deleting files is still too small to accommodate the file you want to store in the F
drive, you will have to perform defragmentation to reclaim fragmented space.---
（
P.3-83
）
Q: "Time Out" was displayed during transmission or reception
of a file.
This may be displayed after a fixed period of time has passed while in the
transmission or reception waiting state.
■ Is the communication software running on the host computer?----(P.1-5)
■ Is the communication settings made correctly?----(P.1-5)
■ Are the GTX-100 and the host computer connected correctly?----(P.1-8)
■ Does the host computer have enough resources?
When applications other than the communication software are being used, the computer may
run out of resources and cause the file transmission and reception to fail. Close as many appli-
cations not needed for communication as possible, and then try again.
Q: "Connection Failed" was displayed during transmission or
reception of a file.
■ Have the communication setup for wireless communications and the network
setup been performed correctly?----(P.1-8)
■ Is the FTP server running on the host computer?
■ Are the access point (our recommended item) and computer connected cor-
rectly through the LAN circuit?----(P.1-8)
■ Have the FTP settings been made correctly? ----(P.3-38)
■ Has the BluePorter running on the host computer?
■ Is it connected to the other remote device than the targeted remote device?
■ Is the setup of the remote device and the security identical?
■ Has the terminal ID and Remote device been setup correctly?